View HLMP-AD61-X1TZZ_4173546.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HLMP-AD61, HLMP-AM61 and HLMP-AB61
Precision Optical Performance Red, Green and Blue 5mm Mini Oval LEDs
Data Sheet
Description
These Precision Optical Performance Oval LEDs are specifically designed for full color/video and passenger information signs. The oval shaped radiation pattern and high luminous intensity ensure that these devices are excellent for wide field of view outdoor applications where a wide viewing angle and readability in sunlight are essential. These lamps have very smooth, matched radiation patterns ensuring consistent color mixing in full color applications, message uniformity across the viewing angle of the sign. High efficiency LED material is used in these lamps: Aluminum Indium Gallium Phosphide (AlInGaP II) for red and Indium Gallium Nitride for blue and green. Each lamp is made with an advanced optical grade epoxy offering superior high temperature and high moisture resistance in outdoor applications.
Features
* Well defined spatial radiation pattern * High brightness material * Available in red, green and blue color. Red AlInGaP 630mm Green InGaN 525nm Blue InGaN 470nm * Superior resistance to moisture * Standoff package
Applications
* Full color signs * Commercial outdoor advertising.
Package Dimensions
11.500.2 0.453.01 8.700.20 0.342.008 24.00 0.945 1.0 MIN. 0.038
Measured at base of lens
3.800.20 0.150.008
1.500.15 0.05910.006
CATHODE LEAD
2.540.3 0.1000.012
5.20.2 0.205.008
0.8 0.032 MAX. Epoxy Meniscus
0.500.10 0.0200.004
NOTES: Dimensions in Millimeters (Inches) For Blue and Green if heat-sinking application is required, the terminal for heat sink is anode.
Caution: InGaN devices are Class 1C HBM ESD Sensitive per JEDEC Standard. Please observe appropriate precautions during handling and processing. Refer to Application Note AN-1142 for additional details.
Device Selection Guide
Color and Dominant Wavelength d (nm) Typ
Red 630 Green 525 Blue 470
Luminous Intensity Iv (mcd) at 20 mA
Min 1660 2400 550
Luminous Intensity Iv (mcd) at 20 mA
Max 3500 5040 1150
Part Number
HLMP-AD61-X1TZZ HLMP-AM61-Z30ZZ HLMP-AB61-RU0ZZ
Tolerance for each intensity limit is 15%. Notes: 1. The luminous intensity is measured on the mechanical axis of the lamp package
Part Numbering System
HLMP - A x 61 x x x x x Packaging Option ZZ: Flexi Ammo-packs Color Bin Selection 0: Open distribution T: Red Color, Vf maximum =2.6V Maximum Intensity Bin 0: No maximum intensity limit Minimum Intensity Bin Refer to Device Selection Guide. Color B: Blue 470 D: Red 630 M: Green 525 Package A: 5mm Mini Oval 30 x 70
2
Absolute Maximum Rating (TA = 25C)
Parameter
DC Forward Current
[1]
Red
50 100 130 5 (IR = 100 A) 130 -40 to +100 -40 to +120
[2]
Blue and Green
30 100 116 5 (IR = 10 A) 110 -40 to +85 -40 to +100
[3]
Unit
mA mA mW V C C C
Peak Forward Current Power Dissipation Reverse Voltage LED Junction Temperature Operating Temperature Range Storage Temperature Range
Notes: 1. Derate linearly as shown in Figure 4 and Figure 8 2. Duty Factor 30%, frequency 1KHz 3. Duty Factor 10%, frequency 1KHz
Electrical / Optical Characteristics (TA = 25C)
Parameter
Forward Voltage Red Green Blue Reverse Voltage Red Green & blue Dominant Wavelength Red Green Blue Peak Wavelength Red Green Blue Spectral Half width Red Green Blue Thermal Resistance, Luminous Efficacy Red Green Blue
[3]
Symbol Min.
VF 2.0 2.8 2.8 VR 5 5 D 622 520 460 PEAK
Typ. Max. Units Test Conditions
V 2.3 3.3 3.2 2.6[1] 3.8 3.8 V IF = 100 A IF = 10 A IF = 20 mA 630 525 470 639 516 464 634 540 480 nm Peak of Wavelength of Spectral Distribution at IF = 20 mA IF = 20 mA
1/2 17 32 23 RJ-PIN V 155 520 75 lm/W Emitted Luminous Power/Emitted Radiant Power 240 nm Wavelength Width at Spectral Distribution 1/2 Power Point at ,IF = 20 mA LED Junction-to-pin
C/W
Notes: 1. For option -xxTxx, the VF maximum is 2.6V, refer to Vf bin table 2. The dominant wavelength is derived from the chromaticity Diagram and represents the color of the lamp 3. The radiant intensity, Ie in watts per steradian, may be found from the equation Ie = IV/V where IV is the luminous intensity in candelas and V is the luminous efficacy in lumens/watt 4. Forward voltage allowable tolerance is 0.05V 5. For AlInGaP Red, thermal resistance applied to LED junction to cathode lead. For InGaN blue and Green, thermal resistance applied to LED junction to anode lead
3
AlInGaP Red
IF MAX - MAXIMUM FORWARD CURRENT - mA
1.0
60 50 RJ-A=585C/W 40 RJ-A=630C/W 30 20 10 0 0 80 TA - AMBIENT TEMPERATURE - oC 20 40 60 100
RELATIVE INTENSITY
0.5
0
550
600
650
700
WAVELENGTH - nm
Figure 1. Relative Intensity vs Wavelength
Figure 2. Maximum Forward Current vs Ambient Temperature
50 40 30 20 10 0
2.5 2.0 1.5 1.0 0.5 0
IF - FORWARD CURRENT - mA
RELATIVE INTENSITY (NORMALIZED AT 20 mA)
0
0.5 1.0 1.5 2.0 2.5 V F - FORWARD VOLTAGE - V
3.0
0
10 30 20 40 FORWARD CURRENT - mA
50
Figure 3. Forward Current vs Forward Voltage
Figure 4. Relative Intensity vsForward Current
4
InGaN Blue and Green
1.00 0.80 35 30
RELATIVE INTENSITY
FORWARD CURRENT - mA
650
BLUE 0.60 0.40 0.20 0 350
GREEN
25 20 15 10 5 0 0 1 3 2 FORWARD VOLTAGE - V 4
400
450
500
550
600
WAVELENGTH - nm
Figure 5. Relative Intensity vs Wavelength
Figure 6. Forward Current vs Forward Voltage
1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 DC FORWARD CURRENT - mA
IF - MAXIMUM FORWARD CURRENT - mA
1.6 RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA)
35 30 RJ-A=630C/W 25 20 15 10 5 0 0 20 40 60 80 100 TA - AMBIENT TEMPERATURE - oC
Figure 7. Relative Intensity vs Forward Current
Figure 8. Maximum Forward Current vs Ambient Temperature
5
RELATIVE DOMINANT WAVELENGHT SHIFT (NORMALIZED AT 20mA)
10 8 6 4 2 0 -2 -4 0 5 10 15 20 25 30 FORWARD CURRENT - mA BLUE GREEN
Figure 9. Relative dominant wavelength vs Forward Current
1
NORMALIZED INTENSITY
0.5
0 -90 -60 -30 0 30 60 90 ANGULAR DISPLACEMENT - DEGREES
Figure 10. Radiation pattern-Major Axis
1
NORMALIZED INTENSITY
0.5
0 -90 -60 -30 0 30 60 90 ANGULAR DISPLACEMENT - DEGREES
Figure 11. Radiation pattern-Minor Axis
6
Intensity Bin Limit Table (1.2: 1 Iv Bin Ratio)
Intensity (mcd) at 20 mA Bin
Q R S T U V W X Y Z 1 2 3 Min 460 550 660 800 960 1150 1380 1660 1990 2400 2900 3500 4200 Max 550 660 800 960 1150 1380 1660 1990 2400 2900 3500 4200 5040
Green Color Bin Table
Bin
1
Min Dom
520.0
Max Dom
524.0
Xmin
0.0743 0.1650
Ymin
0.8338 0.6586 0.8292 0.6556 0.8148 0.6463 0.7965 0.6344 0.7764 0.6213
Xmax
0.1856 0.1060 0.2068 0.1387 0.2273 0.1702 0.2469 0.2003 0.2659 0.2296
Ymax
0.6556 0.8292 0.6463 0.8148 0.6344 0.7965 0.6213 0.7764 0.6070 0.7543
2
524.0
528.0
0.1060 0.1856
3
528.0
532.0
0.1387 0.2068
4
532.0
536.0
0.1702 0.2273
5
536.0
540.0
0.2003 0.2469
Tolerance for each bin limit is 0.5nm
Tolerance for each bin limit is 15%
Blue Color Bin Table
Bin Min Dom
460.0
Max Dom
464.0
Xmin
0.1440 0.1818
Ymin
0.0297 0.0904 0.0374 0.0966 0.0495 0.1062 0.0671 0.1209 0.0945 0.1423
Xmax
0.1766 0.1374 0.1699 0.1291 0.1616 0.1187 0.1517 0.1063 0.1397 0.0913
Ymax
0.0966 0.0374 0.1062 0.0495 0.1209 0.0671 0.1423 0.0945 0.1728 0.1327
VF bin Table (V at 20mA)
Bin ID
VA VB VC
1
Min.
2.0 2.2 2.4
Max.
2.2 2.4 2.6
2
464.0
468.0
0.1374 0.1766
3
468.0
472.0
0.1291 0.1699
Tolerance for each bin limit is 0.05
4
472.0
476.0
0.1187 0.1616
Red Color Range
5 476.0 480.0
0.1063 0.1517
Min Dom Max Dom Xmin Ymin Xmax Ymax
622 634 0.6904 0.3094 0.6945 0.2888 0.6726 0.3106 0.7135 0.2865
Tolerance for each bin limit is 0.5 nm
Tolerance for each bin limit is 0.5nm Note: 1. All bin categories are established for classification of products. Products may not be available in all bin categories. Please contact your Avago representative for further information
7
Avago Color Bin on CIE 1931 Chromaticity Diagram
1.000
0.800
Green
1 23 4
5
0.600
Y
0.400
Red
0.200 5 4 3 2 0.000 0.000
Blue
1 0.200 0.300 0.400 X 0.500 0.600 0.700 0.800
0.100
8
Precautions
Lead Forming: * The leads of an LED lamp may be preformed or cut to length prior to insertion and soldering into PC board. * If lead forming is required before soldering, care must be taken to avoid any excessive mechanical stress induced to LED package. Otherwise, cut the leads of LED to length after soldering process at room temperature. The solder joint formed will absorb the mechanical stress of the lead cutting from traveling to the LED chip die attach and wirebond. * For better control, it is recommended to use proper tool to precisely form and cut the leads to length rather that doing it manually. Soldering Condition: * Care must be taken during PCB assembly and soldering process to prevent damage to LED component. * The closest manual soldering distance of the soldering heat source (soldering iron's tip) to the body is 1.59mm. Soldering the LED closer than 1.59mm might damage the LED.
1.59mm
Avago Technologies LED configuration
AlInGaP Device
InGaN Device
Note: Electrical connection between bottom surface of LED die and the leadframe material through conductive paste or solder.
* If necessary, use fixture to hold the LED component in proper orientation with respect to the PCB during soldering process.
Note: In order to further assist customer in designing jig accurately that fit Avago Technologies' product, 3D model of the product is available upon request.
* Recommended soldering condition:
Wave Soldering Pre-heat temperature Preheat time Peak temperature Dwell time 105 C Max. 30 sec Max 250 C Max. 3 sec Max. Manual Solder Dipping 260 C Max. 5 sec Max
* At elevated temperature, the LED is more susceptible to mechanical stress. Therefore, PCB must be allowed to cool down to room temperature prior to handling, which includes removal of jigs, fixtures or pallet. * Special attention must be given to board fabrication, solder masking, surface plating and lead holes size and component orientation to assure solderability. * Recommended PC board plated through holes size for LED component leads.
LED component Lead size Diagonal Plated through hole diameter 0.976 to 1.078 mm (0.038 to 0.042 inch) 1.049 to 1.150mm (0.041 to 0.045 inch)
0.457 x 0.457mm 0.646 mm (0.018 x 0.018inch) (0.025 inch) 0.508 x 0.508mm 0.718 mm (0.020 x 0.020inch) (0.028 inch)
* Wave soldering parameter must be set and maintain according to recommended temperature and dwell time in the solder wave. Customer is advised to daily check on the soldering profile to ensure the soldering profile used is always conforming to recommended soldering condition.
Note: 1. PCB with different size and design (component density) will have different heat mass (heat capacity). This might cause a change in temperature experienced by the board if same wave soldering setting is used. So, it is recommended to re-calibrate the soldering profile again prior to loading a new type of PCB. 2. Avago Technologies' high brightness LED are using high efficiency LED die with single wire bond as shown below. Customer is advised to take extra precaution during wave soldering to ensure that the maximum wave temperature is not exceeding recommendation of 250 C. Over-stressing the LED during soldering process might cause premature failure to the LED due to delamination.
Note: Refer to application note AN1027 for more information on soldering LED components.
9
TURBULENT WAVE 250
LAMINAR WAVE HOT AIR KNIFE
200
TEMPERATURE - C
TOP SIDE OF PC BOARD BOTTOM SIDE OF PC BOARD
150 FLUXING 100 CONVEYOR SPEED = 1.83 M/MIN (6 FT/MIN) PREHEAT SETTING = 150C (100C PCB) SOLDER WAVE TEMPERATURE = 245C AIR KNIFE AIR TEMPERATURE = 390C AIR KNIFE DISTANCE = 1.91 mm (0.25 IN.) AIR KNIFE ANGLE = 40 SOLDER: SN63; FLUX: RMA LEAD FREE SOLDER 96.5%Sn; 3.0%Ag; 0.5% Cu NOTE: ALLOW FOR BOARDS TO BE SUFFICIENTLY COOLED BEFORE EXERTING MECHANICAL FORCE. 40 50 TIME - SECONDS 60 70 80 90 100
50 30 PREHEAT 10 20 30
0
10
Ammo Packs Drawing
Note: The ammo-packs drawing is applicable for packaging option -DD & - ZZ and regardless standoff or non-standoff
Packaging Box for Ammo Packs
Note: For InGaN device, the ammo pack packaging box contain ESD logo
11
For product information and a complete list of distributors, please go to our web site:
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright (c) 2006 Avago Technologies Limited. All rights reserved. Obsoletes AV01-0420EN AV01-0606EN - October 20, 2006

▲Up To Search▲

Price & Availability of HLMP-AD61-X1TZZ

	To Download HLMP-AD61-X1TZZ Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .